Probleme mit sky

Hard- und Software Fragen rund um die dbox2 - außer zu, JtG-Team-Image
Antworten
Nachricht
Autor
TheBeast123
Gelegenheits-Streamer
Gelegenheits-Streamer
Beiträge: 60
Registriert: Sa 19 Jan 2008, 10:37

Probleme mit sky

#1 Beitrag von TheBeast123 » So 12 Jul 2009, 14:20

Hallo,

habe mir ein Sky-abo zugelegt.
Von denen habe ich auch eine neue Smartkarte bekommen.

Gestern wollte ich mir die neue Smartkarte freischalten lassen, diese funktioniert leider nicht.
Vor dem freischalten habe ich die Sender neu suchen lassen. Heuete habe ich dann das aktuelle snapshot aufgespielt (2.3.3). Auch damit funktioniert es leider nicht. Woran könnte es liegen?


eine bootbericht wird folgen, sobald ich wieder zu Hause bin. (bin gerade auf der Arbeit)


Gruss The beast
Nokia DboxII-Kabel mit IDE-Interface derzeitiges Images Jtg.2.3.4
Avia500: V110
Avia600: vb028
Ucode: b107
Cam-Alpha cam_01_02_105D

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

Re: Probleme mit sky

#2 Beitrag von jmittelst » So 12 Jul 2009, 16:55

Wahrscheinlichster Grund:

Die Karte ist keine Betacrypt-Karte für den Nagra-Tunnel. Nur diese funktionieren in der Dbox2.
Die neuen NDS-Karten funktionieren nur in dafür vorgesehenen Receivern.

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

Benutzeravatar
DrStoned
Moderator
Moderator
Beiträge: 2604
Registriert: Mo 15 Sep 2003, 22:57
Wohnort: Reutlingen
Kontaktdaten:

Re: Probleme mit sky

#3 Beitrag von DrStoned » Mo 13 Jul 2009, 6:01

Das könnte auch ein Grund sein. Deine Angaben sind etwas spärlich. Was für eine Box (SAT oder Kabel) und was steht auf Deiner Smartcard drauf?
Greetz von DrStoned :lol: :lol: :lol:

1. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0 mit 64 MB Onbord-RAM, 100 GB Wechsel-Festplatte, 1GB-CF-Karte, USB-Interface, blaues Display
2. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0
3. Box: Nokia Avia 500 2x AMD Kabel Bmon 1.0
4. Box: Dreambox 7025+ 2 SAT-Tuner mit 250 MB Festplatte, 2 GB CF-Karte
Image: Immer aktuelles JtG-Image, mit aktuellem Snapshot
Hardware: StreamPC: ASUS-A7V-133 Athlon 900, 256MB RAM, NIC 3COM 3C905C-TX 40 GB + 160 GB + 400 GB Festplatte, DVD-Brenner: LG-4160B
Arbeits-PC: MSI-KT3 Ultra Athlon 2800XP 512MB RAM, DVD-Brenner: Toshiba SD-R5112,
DVD-Player: APEX AD703, Daewoo 5000N
Software: SFU 3.5, ProjectX, Cuttermaran, Nero 6.0.0.19, VLC 0.72

TheBeast123
Gelegenheits-Streamer
Gelegenheits-Streamer
Beiträge: 60
Registriert: Sa 19 Jan 2008, 10:37

Re: Probleme mit sky

#4 Beitrag von TheBeast123 » Mo 13 Jul 2009, 7:43

Hallo,
ich besitze eine Nokia Dbox mit Kabelanschluss und IDE Interface.

Die Karte, die ich besitze hat eine Nummer, die lautet D02.

Dies ist der aktuelle Bootlog:
zapit shot down :)
starting pid 187, tty '': '/etc/init.d/halt'
CXA2092 found
CXA2092 found
Unmounting 'tmpfs' on '/tmp'
umount: can't umount /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW!
Sent SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sent SIGKILL to all processes
Requesting system reboot
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-05.b4.02.07.00.00-fb
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 172048
verify sig: 262
Branching to 0x40000


U-Boot 2009.01 (Tuxbox) (10.02.2009 09:36:41)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found "console" with value ttyS0
env: found "baudrate" with value 9600
env: found "dbox_duplex" with value 1
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
env: found "lcd_bias" with value 0
env: can't set "lcd_bias"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670726 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670662 Bytes = 654.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.2-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #3 Sa 4. Jul 12:
09:48 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:64:ca
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.2 (2009-07-04 12:10:18 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: Unknown
route: SIOCADDRT: Network is unreachable
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: Unknown
dboxide: sreset succeeded
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: SAMSUNG HD400LD, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
SGI XFS with no debug enabled
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
Adding Swap: 1028148k swap-space (priority -1)
XFS mounting filesystem ide0(3,2)
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
setting drive write-caching to 0 (off)
setting standby to 0 (off)
IO_support = 1 (32-bit)
write-caching = 0 (off)
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
ves1820_v13 was compiled for kernel version 2.4.35.3-dbox2
while this kernel is version 2.4.37.2-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.302 2009/06/27 19:47:19 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
rdate: cannot connect to remote host (130.60.7.42): Network is unreachable
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.431 2009/06/28 21:56:14 seife Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[camd] ca system id: 1722
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
imageinfo: JTG-Image [IDE] (2.3.3)
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 6739
[camd] set emm caid 1722 capid 1500
12:00:24.230 [timeThread] - 13.07.2009 11:36:55, tim: Mon Jul 13 11:36:55 2009
12:00:24.287 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
SPTS, queue 0 extended.
[camd] program number 0011 unsupported due to missing parental control
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
11:36:55.181 dmxSDT: going to sleep...
TuxTxt running thread...(020)
11:36:55.517 eit_set_update_filter, servicekey = 0x300850011, current version 4
TuxTxt service started 20
[sectionsd] linkage in current EPG found.
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] linkage in current EPG found.
So habe jetzt mal die camd2 von Ditmar-h kopiert (zu testzwecken)

Code: Alles auswählen

starting pid 196, tty '': '/etc/init.d/halt'
CXA2092 found
CXA2092 found
Unmounting 'xfs' on '/hdd'
Unmounting 'tmpfs' on '/tmp'
umount: can't umount /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
umount: can't forcibly umount /var: Device or resource busy
Oops: umount failed :-(  --  trying to remount readonly...
Ready to shutdown system...
The system is going down NOW!
Sent SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sent SIGKILL to all processes
Requesting system reboot
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-05.b4.02.07.00.00-fb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 172048
verify sig: 262
Branching to 0x40000


U-Boot 2009.01 (Tuxbox) (10.02.2009 09:36:41) 

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
env: found "console" with value ttyS0
env: found "baudrate" with value 9600
env: found "dbox_duplex" with value 1
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
env: found "lcd_bias" with value 0
env: can't set "lcd_bias"
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670726 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    670662 Bytes = 654.9 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.2-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #3 Sa 4. Jul 12:
09:48 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:64:ca
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.2 (2009-07-04 12:10:18 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: Gurgel
route: SIOCADDRT: Network is unreachable
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: Gurgel
dboxide: sreset succeeded
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: SAMSUNG HD400LD, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
SGI XFS with no debug enabled
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
Adding Swap: 1028148k swap-space (priority -1)
XFS mounting filesystem ide0(3,2)
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface

/dev/ide/host0/bus0/target0/lun0/disc:
 setting 32-bit IO_support flag to 1
 setting drive write-caching to 0 (off)
 setting standby to 0 (off)
 IO_support    =  1 (32-bit)
 write-caching =  0 (off)
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
        ves1820_v13 was compiled for kernel version 2.4.35.3-dbox2
        while this kernel is version 2.4.37.2-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan  1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.302 2009/06/27 19:47:19 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
rdate: cannot connect to remote host (130.60.7.42): Network is unreachable
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.431 2009/06/28 21:56:14 seife Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding to mainmenue/personalize
imageinfo: JTG-Image [IDE] (2.3.3)
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) 
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 6739
[camd] set emm caid 1722 capid 1500
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 0011
12:00:24.759 [timeThread] - 13.07.2009 14:03:01, tim: Mon Jul 13 14:03:01 2009
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
12:00:24.857 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0011 status: 5050
TuxTxt running thread...(020)
TuxTxt service started 20
14:03:01.331 dmxSDT: going to sleep...
[sectionsd] linkage in current EPG found.
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
14:03:01.643 eit_set_update_filter, servicekey = 0x300850011, current version 30

[sectionsd] linkage in current EPG found.
Nokia DboxII-Kabel mit IDE-Interface derzeitiges Images Jtg.2.3.4
Avia500: V110
Avia600: vb028
Ucode: b107
Cam-Alpha cam_01_02_105D

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

Re: Probleme mit sky

#5 Beitrag von jmittelst » Di 14 Jul 2009, 4:44

http://wiki.dbox2-tuning.net/wiki/index.php/Camd2
1. program number XXXX unsupported due to missing parental control
Die camd2 enthält keinen Support für Premiere.


2. descramble onid: .... status: 5050
Ihre Smartcard ist für die Sendung nicht freigeschaltet.
Im 1. Versuch war die Camd2 ungeeignet.
Im 2. Versuch war die Karte wohl noch nicht freigeschaltet.

Also die Camd2 mit Premiere-Support drin lassen und ggf. warten, ob die Karte irgendwann ihr Freischaltsignal bekommt oder dies neu anfordern.
Bei Premiere gab es das auf der Webseite, bei Sky hab ich das noch nicht machen müssen.

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

Benutzeravatar
Pedant
admin-c
admin-c
Beiträge: 4285
Registriert: Mo 04 Aug 2003, 16:22
Wohnort: Bad Vilbel
Kontaktdaten:

Re: Probleme mit sky

#6 Beitrag von Pedant » Di 14 Jul 2009, 12:01

Hallo,

bei sky geht das auch über die Webseite, nach erfolgtem Login.
https://www.sky.de/web/cms/de/kundencen ... ierung.jsp

Gruß Frank
Sagem 1xi + HDD Kabel, JtG-Team Image v2.4.6 (19.12.2015), avia600vb028, ucode int., cam_01_02_105D
Coolstream Neo, FW 2.10 (leider kaputt)
Win 10 Pro x64, i7 920, 12 GB, SSD
u-Grabber 0.2.7.6-> TS -> PX 0.91.0.08 -> IfoEdit 0.971 -> ImgBurn 2.5.0.0 -> DVD-R

TheBeast123
Gelegenheits-Streamer
Gelegenheits-Streamer
Beiträge: 60
Registriert: Sa 19 Jan 2008, 10:37

Re: Probleme mit sky

#7 Beitrag von TheBeast123 » Di 14 Jul 2009, 16:42

Hallo,
falls ich kein freischaltsignal "empfangen" kann, könnte ich dann die Karte in einem andrern decoder Freischalten lassen, und anschliessend wieder in meiner Dbox stecken?

Und schon mal vielen Dank für eure Hilfe.

Gruss

The Beast
Nokia DboxII-Kabel mit IDE-Interface derzeitiges Images Jtg.2.3.4
Avia500: V110
Avia600: vb028
Ucode: b107
Cam-Alpha cam_01_02_105D

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

Re: Probleme mit sky

#8 Beitrag von jmittelst » Di 14 Jul 2009, 16:49

Ja, das geht.

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

TheBeast123
Gelegenheits-Streamer
Gelegenheits-Streamer
Beiträge: 60
Registriert: Sa 19 Jan 2008, 10:37

Re: Probleme mit sky

#9 Beitrag von TheBeast123 » Mi 15 Jul 2009, 9:11

Hallo,

habe gerade mal einen anderen Dekoder ausprobiert. Habe dann nochmal ein Freisachaltungssignal schicken lassen. Bei diesem Gespräch wurde festgestellt, das sie mir eine falsche Smartkarte zugeschcikt wurde (falsche Kabelanbieter). Nun muss ich schauen, wie es mit der neuen Karte läuft. Melde mich dann


edit (16.07)


habe heute meine neue Smartcard bekommen. Freischalten lassen, und siehe da, es funktioniert.

und herzlichen Dank für eure Hilfe
Cu
theBeast
Nokia DboxII-Kabel mit IDE-Interface derzeitiges Images Jtg.2.3.4
Avia500: V110
Avia600: vb028
Ucode: b107
Cam-Alpha cam_01_02_105D

Antworten