habe mich jetzt schon eine ganze weile mit meinem neuem IDE interface herumgequält, vielleicht hat von euch jemand noch eine Idee
Ausgangssituation interface eingebaut lt.bootlog Walking Bit Test failed
slot gereinigt ohne Erfolg.
Das seltsame ist aber das beim ersten hochlauf der Box folgende Meldung erscheint
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.6.1 (2007-08-18 09:43:02 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38bb000
Probing IDE interface ide0...
dboxide: inb: fifo not empty?!
CPLD Status is 0812a017
dboxide: trace
0589f6b1: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
055e6273: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
051d1065: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
05136727: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
04e91af8: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
04b1fda1: INB 17 a0
c388f140 c388f1d8 c388f5b0 c3890220
0459fd72: OUTB 16 a0
c38824ec c38b6ab8 c388b9a0 c38b6b20
trace end.
dboxide: inb: fifo not empty?!
Eine Festplatte wird dabei nicht erkannt
Nach einem Neustart kommt dann die Meldung
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.6.1 (2007-08-18 09:43:02 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38aa000
dboxide: probing dbox2 IDE CPLD: walking bit test failed: 0xfffffffd != 0x000000
02
dboxide: no valid IDE-Interface detected
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
swapon: can't stat '/dev/ide/host0/bus0/target0/lun0/part1': No such file or dir
ectory
usw usw
Also ich komme hier nicht weiter. Achso habe das Interface mit meiner Kabelbox ausprobiert dort wurde es erkannt also am Interface liegts nicht.
