Seite 1 von 1

nach flash wird u-boot auf dem display angezeigt

Verfasst: Sa 17 Jul 2010, 10:20
von napster58
hallo , ich habe gestern seit langem mal wieder versucht einen neuen Image mir zu packen . Als das flashen fertig war wollte ich neustarte dann sah ich das sich nichts tut. Auf dem display steht nach lade.... u-boot 2009.8 . so etwas hatte ich noch nie deshalb mache ich vielleicht Panik das mein gerät kaputt ist .
was ist das (u-boot) was war falsch und das wichtigste wie kann ich ein neuen Image wieder rauf packen . Ich versuche seit gestern wieder was neues zu flashen jedoch keine ftp Verbindung

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: Sa 17 Jul 2010, 13:31
von DrStoned
Das mit dem Uboot ist bei den neuen Images schon korrekt, zum Flashen eines neuen Images siehe http://www.jackthegrabber.de/viewtopic.php?f=19&t=11310

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: Sa 17 Jul 2010, 14:34
von napster58
leider , ich versuche schon wieder seit heute morgen etwas anderes zu flashen aber geht leider nicht , keine verbindung .

Hier mal die log :

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>

-------------------------------------------------------------

vieleicht ist der image falsch wie sie sagen bei den neuen images ist das so . vielleicht könnten sie mir einen Sat 2X image vorschlagen . Hauptsache man kann ***** damit betreiben

danke im voraus

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: Sa 17 Jul 2010, 15:15
von napster58
jezt habe ich diese log :

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b3.d5.02.07.00.00-92
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: Sa 17 Jul 2010, 19:14
von napster58
habe es endlich geschafft jedoch jetzt fehlen mir die ucodes.die box habe ich ja erst neu gekauft deshalb habe ich die alten nicht gehabt . wer kann mir sagen woher ich es bekomme

danke

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: So 18 Jul 2010, 6:48
von jmittelst
Siehe Boardregeln:
...Alle Anfragen nach (c) geschützter Software (ucodes, BR-Images, etc.) sind zu unterlassen...
Ucodes liest man aus dem gesicherten Betanova-Image aus. Dies gehört zu jeder Dbox2 und sollte auch bei "Bastelboxen" auf CD mitgeliefert werden und funktioniert mit dem Dbox2Bootmanager.
Auch Linux-Images haben die an Board (in /var/tuxbox/ucodes), aus Sicherungen kann man die mit den NewTuxFlashtools extrahieren. Benötigt werden i.d.R. sowieso nur die Cam_Alpha.bin passend zur verwendeten Karte und die Avia.bin passend zur Box. Die Ucode.bin ist in aktuellen Images in der sehr gut funktionierenden Version 014 eingebaut.
Alternative Ucodes kann man aus Firmwares bauähnlicher Receiver gewinnen, z.B. mit dem Tool Ucodex (Binary im Anhang, sollte eigentlich im CVS sein, vielleicht kann das ja auch mal jemand neu kompilieren) aus Firmware von Micronik, s.a. diese Readme.

cu
Jens

Re: nach flash wird u-boot auf dem display angezeigt

Verfasst: Di 27 Jul 2010, 10:25
von Pedant
Hallo napster58,

darauf dass Deine Frage nach den ucodes gegen unsere Boardregeln verstößt, hat Dich Jens ja schon hingewiesen und Dir legale Alternativen aufgezeigt,
Hauptsache man kann ***** damit betreiben
doch ***** ist auch nicht mit den Boardregeln vereinbar.
Schwarzgucken ist illegal und wird vom Projekt nicht toleriert! Diskussionen zu dem Thema sind zu unterlassen.
Alles was illegal ist, also gegen geltendes Recht verstößt, ist natürlich auch hier verboten.
Du solltest Dir die Boardregeln mal durchlesen, dann wirst Du vermutlich feststellen, dass dieses Forum nicht der richtige Platz für Deine Aktivitäten ist.

Gruß Frank