hallo , ich habe gestern seit langem mal wieder versucht einen neuen Image mir zu packen . Als das flashen fertig war wollte ich neustarte dann sah ich das sich nichts tut. Auf dem display steht nach lade.... u-boot 2009.8 . so etwas hatte ich noch nie deshalb mache ich vielleicht Panik das mein gerät kaputt ist .
was ist das (u-boot) was war falsch und das wichtigste wie kann ich ein neuen Image wieder rauf packen . Ich versuche seit gestern wieder was neues zu flashen jedoch keine ftp Verbindung
nach flash wird u-boot auf dem display angezeigt
- DrStoned
- Moderator
- Beiträge: 2604
- Registriert: Mo 15 Sep 2003, 22:57
- Wohnort: Reutlingen
- Kontaktdaten:
Re: nach flash wird u-boot auf dem display angezeigt
Das mit dem Uboot ist bei den neuen Images schon korrekt, zum Flashen eines neuen Images siehe http://www.jackthegrabber.de/viewtopic.php?f=19&t=11310
Greetz von DrStoned
1. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0 mit 64 MB Onbord-RAM, 100 GB Wechsel-Festplatte, 1GB-CF-Karte, USB-Interface, blaues Display
2. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0
3. Box: Nokia Avia 500 2x AMD Kabel Bmon 1.0
4. Box: Dreambox 7025+ 2 SAT-Tuner mit 250 MB Festplatte, 2 GB CF-Karte
Image: Immer aktuelles JtG-Image, mit aktuellem Snapshot
Hardware: StreamPC: ASUS-A7V-133 Athlon 900, 256MB RAM, NIC 3COM 3C905C-TX 40 GB + 160 GB + 400 GB Festplatte, DVD-Brenner: LG-4160B
Arbeits-PC: MSI-KT3 Ultra Athlon 2800XP 512MB RAM, DVD-Brenner: Toshiba SD-R5112,
DVD-Player: APEX AD703, Daewoo 5000N
Software: SFU 3.5, ProjectX, Cuttermaran, Nero 6.0.0.19, VLC 0.72
1. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0 mit 64 MB Onbord-RAM, 100 GB Wechsel-Festplatte, 1GB-CF-Karte, USB-Interface, blaues Display
2. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0
3. Box: Nokia Avia 500 2x AMD Kabel Bmon 1.0
4. Box: Dreambox 7025+ 2 SAT-Tuner mit 250 MB Festplatte, 2 GB CF-Karte
Image: Immer aktuelles JtG-Image, mit aktuellem Snapshot
Hardware: StreamPC: ASUS-A7V-133 Athlon 900, 256MB RAM, NIC 3COM 3C905C-TX 40 GB + 160 GB + 400 GB Festplatte, DVD-Brenner: LG-4160B
Arbeits-PC: MSI-KT3 Ultra Athlon 2800XP 512MB RAM, DVD-Brenner: Toshiba SD-R5112,
DVD-Player: APEX AD703, Daewoo 5000N
Software: SFU 3.5, ProjectX, Cuttermaran, Nero 6.0.0.19, VLC 0.72
Re: nach flash wird u-boot auf dem display angezeigt
leider , ich versuche schon wieder seit heute morgen etwas anderes zu flashen aber geht leider nicht , keine verbindung .
Hier mal die log :
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
-------------------------------------------------------------
vieleicht ist der image falsch wie sie sagen bei den neuen images ist das so . vielleicht könnten sie mir einen Sat 2X image vorschlagen . Hauptsache man kann ***** damit betreiben
danke im voraus
Hier mal die log :
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
-------------------------------------------------------------
vieleicht ist der image falsch wie sie sagen bei den neuen images ist das so . vielleicht könnten sie mir einen Sat 2X image vorschlagen . Hauptsache man kann ***** damit betreiben
danke im voraus
Re: nach flash wird u-boot auf dem display angezeigt
jezt habe ich diese log :
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b3.d5.02.07.00.00-92
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b3.d5.02.07.00.00-92
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
Re: nach flash wird u-boot auf dem display angezeigt
habe es endlich geschafft jedoch jetzt fehlen mir die ucodes.die box habe ich ja erst neu gekauft deshalb habe ich die alten nicht gehabt . wer kann mir sagen woher ich es bekomme
danke
danke
- jmittelst
- Co-Admin
- Beiträge: 11013
- Registriert: So 16 Nov 2003, 13:42
- Wohnort: Schildgen (Bergisch Gladbach)
- Kontaktdaten:
Re: nach flash wird u-boot auf dem display angezeigt
Siehe Boardregeln:
Auch Linux-Images haben die an Board (in /var/tuxbox/ucodes), aus Sicherungen kann man die mit den NewTuxFlashtools extrahieren. Benötigt werden i.d.R. sowieso nur die Cam_Alpha.bin passend zur verwendeten Karte und die Avia.bin passend zur Box. Die Ucode.bin ist in aktuellen Images in der sehr gut funktionierenden Version 014 eingebaut.
Alternative Ucodes kann man aus Firmwares bauähnlicher Receiver gewinnen, z.B. mit dem Tool Ucodex (Binary im Anhang, sollte eigentlich im CVS sein, vielleicht kann das ja auch mal jemand neu kompilieren) aus Firmware von Micronik, s.a. diese Readme.
cu
Jens
Ucodes liest man aus dem gesicherten Betanova-Image aus. Dies gehört zu jeder Dbox2 und sollte auch bei "Bastelboxen" auf CD mitgeliefert werden und funktioniert mit dem Dbox2Bootmanager....Alle Anfragen nach (c) geschützter Software (ucodes, BR-Images, etc.) sind zu unterlassen...
Auch Linux-Images haben die an Board (in /var/tuxbox/ucodes), aus Sicherungen kann man die mit den NewTuxFlashtools extrahieren. Benötigt werden i.d.R. sowieso nur die Cam_Alpha.bin passend zur verwendeten Karte und die Avia.bin passend zur Box. Die Ucode.bin ist in aktuellen Images in der sehr gut funktionierenden Version 014 eingebaut.
Alternative Ucodes kann man aus Firmwares bauähnlicher Receiver gewinnen, z.B. mit dem Tool Ucodex (Binary im Anhang, sollte eigentlich im CVS sein, vielleicht kann das ja auch mal jemand neu kompilieren) aus Firmware von Micronik, s.a. diese Readme.
cu
Jens
- Dateianhänge
-
- ucodex.zip
- Kommandozeilen-Tool: Aufruf: ucodex.exe Firmware.bin
- (23.2 KiB) 136-mal heruntergeladen
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²
[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!
VU+ Duo²
VU+ Solo²
[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!
Re: nach flash wird u-boot auf dem display angezeigt
Hallo napster58,
darauf dass Deine Frage nach den ucodes gegen unsere Boardregeln verstößt, hat Dich Jens ja schon hingewiesen und Dir legale Alternativen aufgezeigt,
Gruß Frank
darauf dass Deine Frage nach den ucodes gegen unsere Boardregeln verstößt, hat Dich Jens ja schon hingewiesen und Dir legale Alternativen aufgezeigt,
doch ***** ist auch nicht mit den Boardregeln vereinbar.Hauptsache man kann ***** damit betreiben
Du solltest Dir die Boardregeln mal durchlesen, dann wirst Du vermutlich feststellen, dass dieses Forum nicht der richtige Platz für Deine Aktivitäten ist.Schwarzgucken ist illegal und wird vom Projekt nicht toleriert! Diskussionen zu dem Thema sind zu unterlassen.
Alles was illegal ist, also gegen geltendes Recht verstößt, ist natürlich auch hier verboten.
Gruß Frank
Sagem 1xi + HDD Kabel, JtG-Team Image v2.4.6 (19.12.2015), avia600vb028, ucode int., cam_01_02_105D
Coolstream Neo, FW 2.10 (leider kaputt)
Win 10 Pro x64, i7 920, 12 GB, SSD
u-Grabber 0.2.7.6-> TS -> PX 0.91.0.08 -> IfoEdit 0.971 -> ImgBurn 2.5.0.0 -> DVD-R
Coolstream Neo, FW 2.10 (leider kaputt)
Win 10 Pro x64, i7 920, 12 GB, SSD
u-Grabber 0.2.7.6-> TS -> PX 0.91.0.08 -> IfoEdit 0.971 -> ImgBurn 2.5.0.0 -> DVD-R