Hallo zusammen,
eine meiner D-Boxen macht mir Sorgen beim Starten. Wenn ich das Gerät starte, passiert im Display erstmal gar nichts und nach ein paar Sekunden springt dann die Box an und bootet bis zum Jack The Grapper-Logo und fängt dann wieder an zu booten. Das geht nun hintereinanderweg so. Erst wenn ich ein Reset mache, startet die Box normal hoch und ist voll funktionstüchtig. Was ist denn da nicht in Ordnung? Habe schon mehrmals das Image neu eingespielt, aber immer das gleiche Ergebnis. Kann mir da jemand helfen?
Hier noch der Boot-Log vom Kaltstart:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-16.f8.1b.07.00.00-9a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 15 2005 - 12:31:02)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 613248 bytes loaded to 0x100000
.................................................. ....................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 613184 Bytes = 598.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ...
debug: DDF: Calibrating delay loop... debug: D
DF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-16.f8.1b.07.00.00-9a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 15 2005 - 12:31:02)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 613248 bytes loaded to 0x100000
.................................................. ....................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 613184 Bytes = 598.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ...
debug: DDF: Calibrating delay loop... debug: D
DF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-16.f8.1b.07.00.00-9a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 15 2005 - 12:31:02)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 613248 bytes loaded to 0x100000
.................................................. ....................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 613184 Bytes = 598.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ...
debug: DDF: Calibrating delay loop... debug: D
DF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-16.f8.1b.07.00.00-9a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 15 2005 - 12:31:02)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 613248 bytes loaded to 0x100000
.................................................. ....................
Un-Protected 70 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 613184 Bytes = 598.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ...
debug: DDF: Calibrating delay loop... debug: D
DF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-16.f8.1b.07.00.00-9a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
u.s.w.
Danke im voraus
Hans-Jürgen
D-Box2 hat Startprobleme
Wer lesen kann, ist klar im Vorteil
http://tuxbox-forum.dreambox-fan.de/for ... hp?t=46204
Hier wird das Thema und die Lösung beschrieben.
Gruss
Hans-Jürgen
http://tuxbox-forum.dreambox-fan.de/for ... hp?t=46204
Hier wird das Thema und die Lösung beschrieben.
Gruss
Hans-Jürgen
Hallo Hans-Jürgen,
na dann, danke für den Hinweis und viel Erfolg beim Löten.
Gruß Frank
na dann, danke für den Hinweis und viel Erfolg beim Löten.
Gruß Frank
Sagem 1xi + HDD Kabel, JtG-Team Image v2.4.6 (19.12.2015), avia600vb028, ucode int., cam_01_02_105D
Coolstream Neo, FW 2.10 (leider kaputt)
Win 10 Pro x64, i7 920, 12 GB, SSD
u-Grabber 0.2.7.6-> TS -> PX 0.91.0.08 -> IfoEdit 0.971 -> ImgBurn 2.5.0.0 -> DVD-R
Coolstream Neo, FW 2.10 (leider kaputt)
Win 10 Pro x64, i7 920, 12 GB, SSD
u-Grabber 0.2.7.6-> TS -> PX 0.91.0.08 -> IfoEdit 0.971 -> ImgBurn 2.5.0.0 -> DVD-R