JtG-Image Version 2.4.3
Ucodes: avia500.ux avia600.ux cam-alpha.bin ucodes.bin in \var\ucodes gespeichert
Das Interface habe ich wie in der Anleitung beschrieben in der dbox installiert und per Flachbandkabel mit der Festplatte verbunden. Die hängt am Anschluss am Ende des Kabels und nicht in der Mitte (falls das einen Unterschied macht). Die Platte stammt von MDT (ist aber ein umgelabeltes Modell von Western Digital), 2,5 Zoll Größe mit 60GB. Sie ist an einen externen Stromanschluss angeschlossen und rotiert beim Einschalten endlos vor sich hin (funktioniert also).
Ich habe im Image den IDE-Treiber aktiviert: Beim ersten Mal kam die Meldung, das die Einstellungen nicht gespeichert werden konnten. Dann habe ich die Box neu gestartet und den Treiber wieder eingeschaltet. Diesmal kam die Meldung, dass rchmod einen schweren Fehler verursacht hat und ich die dbox neu starten soll.
Daraufhin habe ich dbox ausgeschaltet und mit dem dbox-Bootmanager ein bootlog gemacht. Ich habe die Box wieder gestartet und den IDE-Treiber ein drittes Mal aktiviert. Diesmal kam die Meldung, die Einstellungen seien erfolgreich aktiviert worden. Ich kann aber nirgends eine Partition anlegen. Ich habe die dbox wieder neu gestartet und auch danach konnte ich keine Partition anlegen.
Das Bootlog folgt hier. Kann mir irgendwer helfen?
=================================================
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.19.3 (2011-12-01 17:26:52 CET)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'
Please press Enter to activate this console. starting /etc/init.d/S05drivers ...
[BOOT] running /etc/init.d/S05drivers
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
Detected STB:
Vendor: Sagem
Model: D-BOX2 (1 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp
$
starting /var/etc/init.d/S06hdd ...
/var/etc/init.d/06hdd generated from neutrino ide/mmc/hdd drive-setup
01.03.2012 - 17:35:10
1.86 do not edit!
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.16 2011/06/19 11:49:28 rhabarber1848 Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3b8f000
dboxide: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: sreset failed, status: 0x0080
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
starting /var/etc/init.d/S07mounts ...
/var/etc/init.d/07mounts generated from neutrino ide/mmc/hdd drive-setup
01.03.2012 - 17:35:10
1.86 do not edit!
mount: using /var/etc/fstab
swapon: using /var/etc/fstab
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
Jan 1 02:02:29 dbox syslog.info syslogd started: BusyBox v1.19.3
starting /etc/init.d/S18rdate ...
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
[BOOT] Starting the automounter
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
Jan 1 02:02:34 dbox daemon.err automount[189]: failed to load mapstarting /etc/
init.d/S99gui ...
$Id: sectionsd.cpp,v 1.336 2011/08/30 19:14:23 dbt Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.455 2011/09/22 19:12:08 rhabarber1848 Exp $
[zapit] PMT update enabled
[zapit] Load ScanSetup Setting: 0 0.000000 0.000000 1 1 8
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] init menus...
[neutrino] GUI-Personalize instance created...
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[drive_setup] Instance created
[neutrino] registering as event client
[scan-setup] received 22 providers
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
PES, queue 0 normal.
[pmt] set update filter, sid 0x6dca pid 0x64 version 14
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
02:03:00.411 [timeThread] - 01.03.2012 17:40:57, tim: Thu Mar 1 17:40:57 2012
[neutrino] timeset event. difference is 1330616277 s, stepping...
02:03:00.470 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds.
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
17:40:58.025 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[0] f
ilter 0x4e mask 0xff
17:40:58.029 dmxSDT: going to sleep...
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[timerd] using config file /var/tuxbox/config/timerd.conf
17:40:59.880 eit_set_update_filter, servicekey = 0x44da4016dca, current version
0x8 got events 3
[yhttpd] Webserver starting...
17:41:02.620 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:04.985 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:05.883 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0100 new=0200 when=S
un Mar 25 03:00:00 2012
17:41:05.933 [timeThread] - 01.03.2012 17:41:06, tim: Thu Mar 1 17:41:06 2012
[neutrino] timeset event. difference is 0 s, nothing to do...
17:41:06.049 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds
.
17:41:07.222 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:09.606 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:12.250 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:14.847 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:17.060 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:19.529 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
17:41:21.983 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:24.576 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:26.764 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
[drive_setup] init drive setup 1.86
[drive setup] loadDriveSettings: load settings from /var/tuxbox/config/drivesetu
p.conf
17:41:29.266 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:31.836 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:34.462 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:37.195 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:39.458 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:41.886 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
[drive setup] no settings changed!
17:41:44.383 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:46.976 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:49.399 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:51.766 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:54.153 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:56.853 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:41:59.168 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
17:42:01.646 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
[drive_setup] init drive setup 1.86
[drive setup] loadDriveSettings: load settings from /var/tuxbox/config/drivesetu
p.conf
[drive setup] no settings changed!
17:45:30.889 EIT Update Filter: Activate cnThread
17:45:35.000 zeit > dmxCN.lastChanged + TIME_EIT_VERSION_WAIT
17:45:35.049 eit_set_update_filter, servicekey = 0x44da4016dca, current version
0x9 got events 2
zapit shot down
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Waiting for zapit (max. 9 seconds)
starting pid 264, tty '': '/etc/init.d/rcK'
stoping /etc/init.d/K99gui ...
stoping /etc/init.d/K40tuxmaild ...
stoping /etc/init.d/K40tuxcald ...
stoping /etc/init.d/K31nfsserver ...
killall: portmap: no process killed
killall: rpc.mountd: no process killed
killall: nfsd: no process killed
stoping /etc/init.d/K30autofs ...
Stopping the automounter
/etc/init.d/K30autofs: line 69: can't open /var/run/automount.pid: no such file
kill: you need to specify whom to kill
stoping /etc/init.d/K25cdkVcInfo ...
stoping /etc/init.d/K20inetd ...
stoping /etc/init.d/K18rdate ...
stoping /etc/init.d/K16lircd ...
stoping /etc/init.d/K15syslogd ...
stoping /etc/init.d/K10rtc ...
stoping /etc/init.d/K10network ...
stoping /var/etc/init.d/K07mounts ...
/var/etc/init.d/07mounts generated from neutrino ide/mmc/hdd drive-setup
01.03.2012 - 17:35:10
1.86 do not edit!
swapon: using /var/etc/fstab
stoping /var/etc/init.d/K06hdd ...
/var/etc/init.d/06hdd generated from neutrino ide/mmc/hdd drive-setup
01.03.2012 - 17:35:10
1.86 do not edit!
stoping /etc/init.d/K05drivers ...
CXA2126 found
umount: can't umount /var: Device or resource busy
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
