Hallo!
Nix geht mehr, bekomme kein Image mehr auf die Box. Es hat sicherlich nix mit dem JTG-Image zu tun, allerdings bekomme ich meine Box nicht mehr zum laufen. Hatte das neue JTG-Komplettimage aufgespielt, die Box fuhr noch runter und dann blieb sie bei "LOADING KERNEL" hängen.
Habe einiges gelesen hier, habe Dietmar Tipps versucht in Sachen Bootmanager, aber ich komme nicht weiter. Vorher ging alles ohne Probleme, hatte mehrfach Images geflasht und auch mit dem Netzwerk keine Probleme.
Vielleicht hat jemand einen Tipp und sollte ich doch etwas übersehen haben, dann sorry. Bin kein Experte.
Log Anfang >>>
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 148088
verify sig: 26
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (Mar 16 2004 - 19:21:44)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<-1> for vmlinuz!
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 602428 Bytes = 588.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=> ebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-84.03.1c.07.00.00-15
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 148088
verify sig: 263
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (Mar 16 2004 - 19:21:44)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS: done.
find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<-1> for vmlinuz!
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 602428 Bytes = 588.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=>
Log Ende <<<
Danke,
Jörg[/scroll]
Nach Komplettimage-Installation geht nix mehr
Nach Komplettimage-Installation geht nix mehr
Nokia II Kabel • JtG 0.7.2 • JtG-Team Komplettimage 01.05.04
avia500v110 • avia600vb028 • ucode_014 (built in) • cam_01_02_105E
avia500v110 • avia600vb028 • ucode_014 (built in) • cam_01_02_105E
Hallo,
bist Du sicher, daß Du "ordnungsgemäß" geflasht hast?
So wie ich es sehe, scheint Deine serielle Verbindung ( Nullmodem-Kabel ) nicht OK zu sein.
Also als erstes checken: ob richtiges Kabel, Stecker richtig verbunden sind, ob Com-Port richtig eingestellt ist?
zweitens: Netzwerkverbindugng überprüfen, wirklich ein Crossover Kabel, Netzwerkeinstellungen stimmen, Box und PC im gleichen Adressraum?
Hast Du die "richtigen" Programme "DBox_Boot" z.B.zum flashen und "Total Commander" zur FTP-Verbindung?
Wenn Du dieses Alles überprüft hast und es immer noch nicht funktioniert, geh noch einmal hier auf die Suche, es gibt etliche Threads, die sich mit diesem Bereich befassen und nützliche Links enthalten.
Viel Erfolg
eltinax
bist Du sicher, daß Du "ordnungsgemäß" geflasht hast?
So wie ich es sehe, scheint Deine serielle Verbindung ( Nullmodem-Kabel ) nicht OK zu sein.
Also als erstes checken: ob richtiges Kabel, Stecker richtig verbunden sind, ob Com-Port richtig eingestellt ist?
zweitens: Netzwerkverbindugng überprüfen, wirklich ein Crossover Kabel, Netzwerkeinstellungen stimmen, Box und PC im gleichen Adressraum?
Hast Du die "richtigen" Programme "DBox_Boot" z.B.zum flashen und "Total Commander" zur FTP-Verbindung?
Wenn Du dieses Alles überprüft hast und es immer noch nicht funktioniert, geh noch einmal hier auf die Suche, es gibt etliche Threads, die sich mit diesem Bereich befassen und nützliche Links enthalten.
Viel Erfolg
eltinax
_________________
1 x VU+ Duo 500GB intern 1 x Hauppauge WinTV-Nova-HD-S2 mit WinTV-Ci
Kabel: 2 x Nokia 2I-Avia 500 (1 x IDE), 1 x Sagem 1I-Kabel Avia 600, SAT: (Nokia 2I + IDE), Sagem 1 + 2I (1 x IDE), Philips)
Image JTG-Team 3.10.08 Snapshot aktuell
1 x Komplett (SO2 mit HD, ohne Bu-Li)
Hardware: Athlon 64 6400 Mhz, 2GB DDR2-800, 2 x 1,5 TB S-ATA, LG-GH20LS, Wechselplatten S-ATA 2 x 750GB
Athlon II 4 x 2500 Mhz (45W), 4GB DDR2-800, 1 x 500 GB + 2 x S-ATA 2TB als Medienserver auf Onkyo TX-SR 607 7.1
Klack>yweb>Festplatte in Box>ProjectX>Cuttermaran>IfoEdit
1 x VU+ Duo 500GB intern 1 x Hauppauge WinTV-Nova-HD-S2 mit WinTV-Ci
Kabel: 2 x Nokia 2I-Avia 500 (1 x IDE), 1 x Sagem 1I-Kabel Avia 600, SAT: (Nokia 2I + IDE), Sagem 1 + 2I (1 x IDE), Philips)
Image JTG-Team 3.10.08 Snapshot aktuell
1 x Komplett (SO2 mit HD, ohne Bu-Li)
Hardware: Athlon 64 6400 Mhz, 2GB DDR2-800, 2 x 1,5 TB S-ATA, LG-GH20LS, Wechselplatten S-ATA 2 x 750GB
Athlon II 4 x 2500 Mhz (45W), 4GB DDR2-800, 1 x 500 GB + 2 x S-ATA 2TB als Medienserver auf Onkyo TX-SR 607 7.1
Klack>yweb>Festplatte in Box>ProjectX>Cuttermaran>IfoEdit
Danke eltinax,
habe den Fehler gefunden, nachdem eine andere Box sich übers Netz problemlos flashen lies. Der Bootmanager merkte sich wohl die Mac-Adresse und deshalb ging's nicht. Aber nun ist das Image drauf.
Doch ein anderes Problem hab ich nun. Der aktuelle Snapshot lässt sich nicht installieren. Ich bekomme die Meldung "Die Releasezyklusversion weicht ab, bitte zuerst neues Image installieren." Allerdings ist das vom 16.03. und doch das aktuelle Komplettimage???
Danke schon mal,
Jörg
habe den Fehler gefunden, nachdem eine andere Box sich übers Netz problemlos flashen lies. Der Bootmanager merkte sich wohl die Mac-Adresse und deshalb ging's nicht. Aber nun ist das Image drauf.
Doch ein anderes Problem hab ich nun. Der aktuelle Snapshot lässt sich nicht installieren. Ich bekomme die Meldung "Die Releasezyklusversion weicht ab, bitte zuerst neues Image installieren." Allerdings ist das vom 16.03. und doch das aktuelle Komplettimage???
Danke schon mal,
Jörg
Nokia II Kabel • JtG 0.7.2 • JtG-Team Komplettimage 01.05.04
avia500v110 • avia600vb028 • ucode_014 (built in) • cam_01_02_105E
avia500v110 • avia600vb028 • ucode_014 (built in) • cam_01_02_105E