Hilfe, 2. Box mountet nicht mehr!

Alles zum Thema Grabbing, was nicht speziell zu JtG passt, z.B: Direktstreaming, andere Tools etc.
Antworten
Nachricht
Autor
Treito
Streamsüchtling
Streamsüchtling
Beiträge: 1925
Registriert: So 25 Jan 2004, 9:50
Wohnort: Bremen
Kontaktdaten:

Hilfe, 2. Box mountet nicht mehr!

#1 Beitrag von Treito » Sa 13 Nov 2004, 18:08

Hallo,

meine 2. Box (siehe Signatur) mountet nicht mehr die NFS-Freigabe. Im GUI erscheint nur "Error", der Telnet-Befehl "mount -t nfs:192.168.1.99:/var/d-box /hdd/movie" bringt die Telnet-Box zum Absturz.

Die 2. Box und mein Server hängen am selben Router, meine 1. Box ist über WLAN mit dem Router verbunden, da läuft es tadellos.

Ich kann auch von der 2. Box meinen Server anpingen.

Was ist hier los?

Nachtrag: Hier noch ein Bootlog

Code: Alles auswählen

 # cat /proc/kmsg
<4>Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mo Nov 1 10:37:41 CET 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
<4>Decrementer Frequency = 247500000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 65.74 BogoMIPS
<6>Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:38:ea:6a
<6>loop: loaded (max 8 devices)
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<6>D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
<4> Intel/Sharp Extended Query Table at 0x0035
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<6>Using word write method
<5>Creating 6 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00680000 : "root (squashfs)"
<5>0x00680000-0x007e0000 : "var (jffs2)"
<5>0x007e0000-0x00800000 : "flfs (u-boot)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
<4>avia_av_core: Starting avia_av_wdt thread.
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... eNX
<6>avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
<6>avia_gt_ucode: loaded ucode v0014
<6>avia_gt_ucode: ucode section filters enabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<6>avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>nfs warning: mount version newer than kernel
<5>RPC: sendmsg returned error 22
<4>nfs: RPC call returned error 22
<5>nfs_get_root: getattr error = 22
<4>nfs_read_super: get root inode failed
<6>SPTS, queue 0 extended.
1. Sagem 1xI black, Avia 600vB0.28, interne ucode, JtG-Enigma-Snap 06.02.05
2. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, JtG-Enigma-Snap 31.01.05
3. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, wechselndes Image
Aufnahme mittels NFS-Server: Kanotix 2005-03, AMD Athlon XP 1800, 512 MB SDRAM-133, WD 160 GB S-ATA
Arbeitsrechner: AMD64, 1024 MB Ram, Maxtor 200 GB S-ATA, Kanotix 64 2005-03,
Notebook: AMD Athlon Mobile XP 2600, 256 MB, 30 GB HDD, Kanotix 2005-03

Treito
Streamsüchtling
Streamsüchtling
Beiträge: 1925
Registriert: So 25 Jan 2004, 9:50
Wohnort: Bremen
Kontaktdaten:

#2 Beitrag von Treito » Sa 13 Nov 2004, 19:48

Okay hat sich erledigt *puh*
1. Sagem 1xI black, Avia 600vB0.28, interne ucode, JtG-Enigma-Snap 06.02.05
2. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, JtG-Enigma-Snap 31.01.05
3. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, wechselndes Image
Aufnahme mittels NFS-Server: Kanotix 2005-03, AMD Athlon XP 1800, 512 MB SDRAM-133, WD 160 GB S-ATA
Arbeitsrechner: AMD64, 1024 MB Ram, Maxtor 200 GB S-ATA, Kanotix 64 2005-03,
Notebook: AMD Athlon Mobile XP 2600, 256 MB, 30 GB HDD, Kanotix 2005-03

Benutzeravatar
DrStoned
Moderator
Moderator
Beiträge: 2604
Registriert: Mo 15 Sep 2003, 22:57
Wohnort: Reutlingen
Kontaktdaten:

#3 Beitrag von DrStoned » Sa 13 Nov 2004, 20:14

Ja und, was war?
Greetz von DrStoned :lol: :lol: :lol:

1. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0 mit 64 MB Onbord-RAM, 100 GB Wechsel-Festplatte, 1GB-CF-Karte, USB-Interface, blaues Display
2. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0
3. Box: Nokia Avia 500 2x AMD Kabel Bmon 1.0
4. Box: Dreambox 7025+ 2 SAT-Tuner mit 250 MB Festplatte, 2 GB CF-Karte
Image: Immer aktuelles JtG-Image, mit aktuellem Snapshot
Hardware: StreamPC: ASUS-A7V-133 Athlon 900, 256MB RAM, NIC 3COM 3C905C-TX 40 GB + 160 GB + 400 GB Festplatte, DVD-Brenner: LG-4160B
Arbeits-PC: MSI-KT3 Ultra Athlon 2800XP 512MB RAM, DVD-Brenner: Toshiba SD-R5112,
DVD-Player: APEX AD703, Daewoo 5000N
Software: SFU 3.5, ProjectX, Cuttermaran, Nero 6.0.0.19, VLC 0.72

Treito
Streamsüchtling
Streamsüchtling
Beiträge: 1925
Registriert: So 25 Jan 2004, 9:50
Wohnort: Bremen
Kontaktdaten:

#4 Beitrag von Treito » Sa 13 Nov 2004, 20:41

*ähm* räusper also...

Die Box war abgestürzt, hatte die NFS-Konfiguration vergessen. Beim Wiederherstellen der Konfiguration geriet ein Leerzeichen (zuviel) in den Pfad :oops:, das mochte die Box ganz und gar nicht @automount. Das hat dann die ganze Box runtergerissen, deswegen war auch Telnet mit abgestürzt :shock:
1. Sagem 1xI black, Avia 600vB0.28, interne ucode, JtG-Enigma-Snap 06.02.05
2. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, JtG-Enigma-Snap 31.01.05
3. Sagem 2xI Kabel, Avia600vB0.28, interne ucode, wechselndes Image
Aufnahme mittels NFS-Server: Kanotix 2005-03, AMD Athlon XP 1800, 512 MB SDRAM-133, WD 160 GB S-ATA
Arbeitsrechner: AMD64, 1024 MB Ram, Maxtor 200 GB S-ATA, Kanotix 64 2005-03,
Notebook: AMD Athlon Mobile XP 2600, 256 MB, 30 GB HDD, Kanotix 2005-03

Antworten