Fernbedienung reagiert nicht !

Nachricht

Mastermind · #1 Beitrag von **Mastermind** » Fr 29 Apr 2005, 5:11

Hi,

Ich hab folgendes Problem hab mir jetzt eine Sagem Dbox2 (Avia600, 1xintel) gekauft und hab das neueste JTG Image drauf(war aber bei dem alten Image dasselbe Problem).

Problem:

Wenn ich mit der Fernbedienung umschalten will leuchtet bei jedem tasten druck das licht an der dbox aber ich muss 5x drücken bevor sie umschaltet mal geht es nach 1x meistens aber erst nach mehrmals drücken.
Fernbedienung hatte ich auch schon geöffnet mit Kontakt spray gereinigt
und neue Batterien rein gemacht, hat aber nichts geholfen. Wie gesagt bei jedem tasten druck leuchtet das licht an der Dbox aber umschalten tut sie nicht.

Vielleicht weiß jemand eine Antwort!
!

KeXXeN · #2 Beitrag von **KeXXeN** » Fr 29 Apr 2005, 7:37

Sieht so aus als wenn ein Prozess auf der Box erhebliche Last verursacht so das die Box "einfriert".
Nach einem neustart, oder dem beenden des Prozesses sollte es wieder gehen.
(Passiert manchmal beim aufnehmen)

Mastermind · #3 Beitrag von **Mastermind** » Fr 29 Apr 2005, 7:46

Hi,

nein das Problem hab ich immer !

Das mit dem ausgelastet hab ich schon ein paar mal gelesen aber das Problem hab ich immer !

KeXXeN · #4 Beitrag von **KeXXeN** » Fr 29 Apr 2005, 9:19

Ok ... dann poste mal ein Bootlog.

Mastermind · #5 Beitrag von **Mastermind** » Fr 29 Apr 2005, 10:10

Was mir jetzt noch aufgefallen ist dass er gleich 2 oder 3 Kanäle weiter schaltet wenn ich einmal drücke(die led an der box leuchtet dann auch 3x mal kurz)

Code: Alles auswählen

;debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-fb.ec.ba.07.00.00-bc
debug: HWrev 61  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Feb 14 2005 - 18:02:18)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 618900 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    618836 Bytes = 604.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.30-dbox2 (vom Jtg-Team)  (gcc version 3.3.5) #1 Mo Apr 4 23:13
:36 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=cramfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30888k available (1052k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3b:43:bf
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
 Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x006a0000 : "root (cramfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.00 (2005.03.16-16:47+0000) multi-call bUsing /lib/modu
les/2.4.30-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.30-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.30-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.30-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.30-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.30-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.30-dbox2/misc/avs.o
Using /lib/modules/2.4.30-dbox2/misc/saa7126.o
Using /lib/modules/2.4.30-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.30-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.30-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.30-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.30-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.30-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.30-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.30-dbox2/avia_av_core: Starting avia_gt_wdt thread.
misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.30-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.30-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.30-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.30-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.30-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.30-dbox2/misc/at76c651.o
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
Using /lib/modules/2.4.30-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.30-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.30-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.30-dbox2/misc/aviaEXT.o
$Id: sectionsd.cpp,v 1.181 2005/03/08 13:39:08 metallica Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
[camd] ca system id: 1722
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld] setting VideoFormat to auto 
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[camd] no card is in slot #2
[camd] a card is in slot #1
/dev/input/event1: No such file or directory
Using /lib/modules/2.4.30-dbox2/kernel/fs/lufs/lufs.o
[CFSMounter] Mount(2) 192.168.1.4:F/Video/Dbox -> /mnt/filme
could not connect to server!
could not mount filesystem!
[CFSMounter] FS mount error: "lufsd none /mnt/filme -o fs=ftpfs,username=xbox,pa
ssword=xbox,host=192.168.1.4,root=/F/Video/Dbox,rw,channels=1,ftpactive,nolock,r
size=20480,wsize,30720"
[neutrino] menue setup
[controld] setting VideoFormat to auto 
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] setting VideoFormat to auto 
[neutrino] initialized everything
[camd] set emm caid 1722 capid 1500
[timeThread] time(): 29.04.2005 11:20:25, tim: Fri Apr 29 11:20:25 2005
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 0017
[camd] out of sync! 6f 02 50 02
[camd] out of sync! 23 89 97 ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] out of sync! ff ff ff ff
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0017 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (4:3 -> 4:3)
[timeThread] time(): 29.04.2005 11:20:35, tim: Fri Apr 29 11:20:35 2005

KeXXeN · #6 Beitrag von **KeXXeN** » Fr 29 Apr 2005, 11:10

Das er mehrere Sender weiter schaltet ist ja ne einstellung (Diverse Einstellungen -> Wiederholungswert).

Könnte aber ein schlimmeres Problem sein.

Siehe

http://tuxbox-forum.mine.nu/forum/viewt ... +out++sync

gurgel hat geschrieben:
[camd] out of sync! ff ff ff ff
vermutlich defekter sec-cam-chip

Mastermind · #7 Beitrag von **Mastermind** » Sa 30 Apr 2005, 7:29

Hi,

ich danke dir für deine mühe, ich glaub ich kauf mir eine andere Dbox2!

mfg Mastermind