Monuten unter SFU

[KeXXeN]

Hm ... da mountet er aber gar kein Verzeichniss, vielleicht wirds daran liegen.?

[whm]

Hallo KeXXen,
war natürlich wieder mein Fehler. Hatte in den Netzwerkeinstellungen der Box "Beim Start mounten" noch auf "Nein" stehen. Soll man ja erst auf "Ja" setzen, wenn alles läuft. Also irgendwas erreicht jedenfalls den PC. Im Verzeichnis ._nfs bekommen vier F-Dateien das aktuelle Datum und Uhrzeit. Anbei das Bootlog mit Mounten "Ja". Darin fand ich auch was zu Mount/Verzeichnis gefunden:

• Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
  Select option (1-3), other keys to stop autoboot: 0
  ### FS (cramfs) loading 'vmlinuz' to 0x100000
  ### FS load complete: 613248 bytes loaded to 0x100000
  ......................................................................
  Un-Protected 70 sectors
  ## Booting image at 00100000 ...
  Image Name: dbox2
  Image Type: PowerPC Linux Kernel Image (gzip compressed)
  Data Size: 613184 Bytes = 598.8 kB
  Load Address: 00000000
  Entry Point: 00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
  Linux version 2.4.27-dbox2 (vom Jtg-Team) (gcc version 3.3.5) #1 Di Mr 15 12:29
  :13 CET 2005
  On node 0 totalpages: 8192
  zone(0): 8192 pages.
  zone(1): 0 pages.
  zone(2): 0 pages.
  Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=cramfs
  Decrementer Frequency = 247125000/60
  m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
  m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
  Console: colour dummy device 80x25
  Calibrating delay loop... 65.53 BogoMIPS
  Memory: 30900k available (1040k kernel code, 368k data, 60k init, 0k highmem)
  Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
  Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
  Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
  POSIX conformance testing by UNIFIX
  Linux NET4.0 for Linux 2.4
  Based upon Swansea University Computer Society NET3.039
  Initializing RT netlink socket
  Starting kswapd
  devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  devfs: boot_options: 0x1
  JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
  i2c-core.o: i2c core module version 2.6.1 (20010830)
  i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
  CPM UART driver version 0.04
  ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
  pty: 256 Unix98 ptys configured
  eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:2e:73
  D-Box 2 flash driver (size->0x800000 mem->0x10000000)
  D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
  Intel/Sharp Extended Query Table at 0x0035
  cfi_cmdset_0001: Erase suspend on write enabled
  Using word write method
  Creating 6 MTD partitions on "D-Box 2 flash memory":
  0x00000000-0x00020000 : "BR bootloader"
  0x00020000-0x00040000 : "flfs (u-boot)"
  0x00040000-0x006a0000 : "root (cramfs)"
  0x006a0000-0x00800000 : "var (jffs2)"
  0x00020000-0x00800000 : "flash without bootloader"
  0x00000000-0x00800000 : "complete flash"
  Linux video capture interface: v1.00
  mice: PS/2 mouse device common for all mice
  NET4: Linux TCP/IP 1.0 for NET4.0
  IP Protocols: ICMP, UDP, TCP
  IP: routing cache hash table of 512 buckets, 4Kbytes
  TCP: Hash tables configured (established 2048 bind 4096)
  NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  VFS: Mounted root (cramfs filesystem) readonly.
  Mounted devfs on /dev
  Freeing unused kernel memory: 60k init
  init started: BusyBox v1.00 (2005.03.15-11:25+0000) multi-call bUsing /lib/modu
  les/2.4.27-dbox2/misc/event.o
  event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
  Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
  Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
  Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
  [i2c-8xx]: mpc 8xx i2c init
  [i2c-8xx]: adapter: 0
  Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
  Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
  Using /lib/modules/2.4.27-dbox2/misc/avs.o
  Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
  Using /lib/modules/2.4.27-dbox2/misc/cam.o
  $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
  Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
  Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
  $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
  DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
  dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
  Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
  $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
  Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
  Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
  avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
  avia_av_core: Starting avia_av_wdt thread.
  avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
  avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
  Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
  avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
  avia_gt_core: autodetecting chip type... eNX
  avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
  avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
  avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
  avia_gt_ucode: loaded ucode vB107
  avia_gt_ucode: ucode section filters disabled.
  avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
  avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
  avia_gt_gv: set_input_size (width=720, height=576)
  avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
  avia_gt_pcm_set_rate(44100)
  avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
  avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
  avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
  avia_gt_core: Loaded AViA eNX/GTX driver
  Using /lib/modules/2.4.27-dbox2/avia_av_core: Starting avia_gt_wdt thread.
  misc/avia_gt_fb.o
  avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
  avia_gt_gv: set_input_mode (mode=2)
  avia_gt_gv: set_input_size (width=720, height=576)
  avia_gt_gv: set_input_mode (mode=2)
  avia_gt_gv: set_input_size (width=720, height=576)
  avia_gt_gv: set_input_mode (mode=2)
  avia_gt_gv: set_input_size (width=720, height=576)
  Console: switching to colour frame buffer device 82x32
  avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
  Using /lib/modules/2.4.27-dbox2/misc/lcd.o
  lcd.o: init lcd driver module
  lcd.o: found KS0713/SED153X lcd interface
  Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
  avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
  avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
  Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
  avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
  avia_gt_pcm_set_rate(44100)
  Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
  avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
  Using /lib/modules/2.4.27-dbox2/misc/tda8044h.o
  DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
  Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
  avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
  Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
  avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
  Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
  Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
  jtginfo $Id: jtginfo.c,v 1.2 2004/10/31 17:51:40 jtgriker Exp $
  $Id: sectionsd.cpp,v 1.181 2005/03/08 13:39:08 metallica Exp $
  caching 504 hours
  events are old 180min after their end time
  $Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
  [camd] ca system id: 1702
  $Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
  
  [controld] Boxtype detected: (2, Philips D-BOX2)
  [nhttpd] Neutrino HTTP-Server starting..
  [basicsocket] send_data: Resource temporarily unavailable
  [basicsocket] send_data: Resource temporarily unavailable
  [basicsocket] send_data: Resource temporarily unavailable
  [neutrino] frameBuffer Instance created
  812k video mem
  avia_gt_gv: set_input_mode (mode=2)
  avia_gt_gv: set_input_size (width=720, height=576)
  [neutrino] Software update enabled
  [neutrino] enable flash
  [basicsocket] send_data: Resource temporarily unavailable
  [basicsocket] send_data: Resource temporarily unavailable
  [lcdd] time-skin not found -> using default...
  [lcdd] weekday-skin not found -> using default...
  [lcdd] date-skin not found -> using default...
  [lcdd] month-skin not found -> using default...
  [LCDFONT] initializing core...
  [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
  [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
  [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
  [LCDFONT] Intializing font cache...
  [LCDFONT] FTC_Face_Requester (Fix15/Bold)
  [LCDFONT] FTC_Face_Requester (Fix14/Bold)
  /dev/input/event1: No such file or directory
  Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
  Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
  Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
  [CFSMounter] Mount(0) 192.168.100.10:/Aufnahme -> /mnt/filme
  [neutrino] menue setup
  loading locales: scandir: No such file or directory
  [neutrino] received 17 sats
  [neutrino] registering as event client
  [basicsocket] send_data: Resource temporarily unavailable
  [basicsocket] send_data: Resource temporarily unavailable
  [basicsocket] send_data: Resource temporarily unavailable
  [neutrino] initialized everything
  PES, queue 0 normal.
  [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
  [timeThread] time(): 27.06.2005 20:50:59, tim: Mon Jun 27 20:50:59 2005
  [timeThread] time(): 27.06.2005 20:51:07, tim: Mon Jun 27 20:51:07 2005
  [LCDFONT] FTC_Face_Requester (Fix12/Regular)
  Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
  Using /lib/modules/2.4.27-dbox2/kernel/fs/lufs/lufs.o
  SUPPORT: NFS: 1, CIFS: 2, LUFS: 2

Gruß WHM

[jmittelst]

Poste mal die betreffenden Zeilen Deiner neutrino.conf bitte.
cu
Jens

[whm]

Ich hoffe, dass das die richtigen Zeilen sind:

network_nfs_automount_0=1
network_nfs_automount_1=0
network_nfs_automount_2=0
network_nfs_automount_3=0
network_nfs_automount_4=0
network_nfs_automount_5=0
network_nfs_automount_6=0
network_nfs_automount_7=0
network_nfs_dir_0=/Aufnahme
network_nfs_dir_1=
network_nfs_dir_2=
network_nfs_dir_3=
network_nfs_dir_4=
network_nfs_dir_5=
network_nfs_dir_6=
network_nfs_dir_7=
network_nfs_ip_0=192.168.100.10
network_nfs_ip_1=
network_nfs_ip_2=
network_nfs_ip_3=
network_nfs_ip_4=
network_nfs_ip_5=
network_nfs_ip_6=
network_nfs_ip_7=
network_nfs_local_dir_0=/mnt/filme
network_nfs_local_dir_1=
network_nfs_local_dir_2=
network_nfs_local_dir_3=
network_nfs_local_dir_4=
network_nfs_local_dir_5=
network_nfs_local_dir_6=
network_nfs_local_dir_7=
network_nfs_mount_options1_0=rw,soft,udp
network_nfs_mount_options1_1=ro,soft,udp
network_nfs_mount_options1_2=ro,soft,udp
network_nfs_mount_options1_3=ro,soft,udp
network_nfs_mount_options1_4=ro,soft,udp
network_nfs_mount_options1_5=ro,soft,udp
network_nfs_mount_options1_6=ro,soft,udp
network_nfs_mount_options1_7=ro,soft,udp
network_nfs_mount_options2_0=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_1=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_2=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_3=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_4=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_5=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_6=nolock,rsize=8192,wsize=8192
network_nfs_mount_options2_7=nolock,rsize=8192,wsize=8192
network_nfs_moviedir=/mnt/filme
network_nfs_password_0=
network_nfs_password_1=
network_nfs_password_2=
network_nfs_password_3=
network_nfs_password_4=
network_nfs_password_5=
network_nfs_password_6=
network_nfs_password_7=
network_nfs_picturedir=
network_nfs_recordingdir=/mnt/filme
network_nfs_type_0=0
network_nfs_type_1=0
network_nfs_type_2=0
network_nfs_type_3=0
network_nfs_type_4=0
network_nfs_type_5=0
network_nfs_type_6=0
network_nfs_type_7=0
network_nfs_username_0=
network_nfs_username_1=
network_nfs_username_2=
network_nfs_username_3=
network_nfs_username_4=
network_nfs_username_5=
network_nfs_username_6=
network_nfs_username_7=

Gruß WHM

[jmittelst]

Kannst Du denn per Nfs-Browser von einem PC auf den anderen zugreifen?
cu
Jens

Unter Netzwerkverbindung - Gesamtes Netzwerk - NFS-Netzwerk - das ist dann der NFS-Browser.
cu
Jens

[whm]

Hallo jmittelst,

- PC-1 ist mit zwei weiteren PC an einen Router angeschlossen, zusätzlich mit einer weiteren Netzwerkkarte an die DBox2-1,
- PC-2 ist nur mit DBox2-2 verbunden.
PC-1 und PC2 haben also keine Verbindung untereinander.

Der NFS-Browser zeigt bei PC-1 folgende Angaben:

Netzwerkumgebung
... Gesamtes Netzwerk
...... Microsoft Windows-Netzwerk
...... Microsoft-Terminaldienste
...... NFS Network
......... Default LAN
............ jupiter
............... \Aufnahme
............... Drucker und Faxgeräte
............ Jupiter
............... \Aufnahme
............... Drucker und Faxgeräte

Warum der Eintrag "jupiter" zweimal kommt weiß ich nicht. Der Computername lautet eigentlich "JUPITER".

Gruß WHM

[whm]

Hallo KeXXen,
Hallo jmittelst,

habe nach meiner letzten Meldung leider nichts mehr von Euch gehört. Heißt das, dass auch nicht mehr weiter wisst. Wäre natürlich nett wenn man das auch dann erfährt, damit ich meine Baustelle auflösen kann.
Trotzdem herzlichen Dank für eure Bemühungen.l

Gruß WHM

[jmittelst]

Wenn mir was eingefallen wäre, hätte ich vielleicht was gepostet. Außer "neu installieren" fällt mir dazu nix mehr ein.
cu
Jens

[KeXXeN]

Ich muss auch leider zugeben das ich am Ende meiner Ideen angekommen bin.

Ich würde das ganze jetzt auch erst einmal ganz vom Anfang Anfangen...

Erst di Box, dann den Rechner...